Cutting and Pasting a Data Object

When you cut and paste a data object, you assign the data object whose information you are already using in the document to a different grid. The source grid in which the data object was initially added is then not assigned with any data object.
You can also use this function for grids that are not on the same page.

Prerequisite: You have opened a document in the document editor. The document contains either static or dynamic grids. The same category is assigned to the source and target grids. Layouts are also assigned to the grids and, at minimum, a data object is assigned to the source grid.

1. Choose the page on which you want to cut a data object.

2. Open the Data Objects tab.

3. In the document preview, click the object handle next to the data object that you want to add to another grid.

A menu opens.

4. Choose Cut data object.

5. Open the menu next to the grid where you want to paste the data object.

6. Choose Paste data object.

The data objectis assigned to the second grid. No data objectis assigned to the first grid, which is displayed with a gray X.